Hot Brander Of Electric Tire Retreading Hot Branding For Custom 8
Tires Retreading Line
Product Description
Used tire retreading machine / tire recycling machine / recycling
machinery for waste tires is the main machine for cold tire
retreading line, it can curing tread rubber on top of machine, and
it can loading different tires size and number in one tank, can
reach your different kind of requirements for tire retreading.
Used tire retreading machine / tire recycling machine / recycling
machinery for waste tires work principle:
In high temperature and high pressure environment, the rubber is
vulcanized and the whole vulcanization process is completed by
using a new type of electric heating. The new stainless steel
electrothermal tube sub-group N arranged in the tank wall, the high
temperature fan through the temperature cycle plate to spread the
heat from the back to the front evenly, pushed to the tank door,
returned to the fan guide. Throughout the tank, the temperature is uniform and the pressure is
constant, thus forming a working environment for tire
vulcanization.
Technical Parameter:
| Model | HG-8 |
| Capacity | 8 tires/batch |
| Heating type | Steam, electric, oil |
| Suitable for | Car, truck, OTR tire |
| Size | 4000*1800*2300mm |
working process of the tyre retreading flow chart:
1.check out
Make sure the used tire casing can be accepted for retreading, or
rejection.
2) Buffing
Buffing tire casing, buffing the worn tread rubber..
3) Planing
Remove all embedded objects in the casing, make sure the tire
surface clean and solid, suitable for retreading.
4) Use glue gun
Use glue gun to spray a thin layer of concentrated liquid cement in
the repair tire casings.
5) Glue filling
Fill in the repair cementing in the tire wound.
6) Apply the tread rubber
Apply the cushion gum between the tread rubber and the casing, as
the bonding layer. As a new layer , the intensive precure tread
rubber is forming in the tire casings
7) Assemble envelop
A special envelop is used to package the tires, ensure the tire
casing and precure tread rubber successfully bond together
8) Curing
This is a process of applying the new tread rubber to the prepared
tire casings, then put into curing chamber, in a certain pressure
and temperature after a period of correct time curing, the cushion
rubber layer will adhere tight to the tire casings.
9) Final inspection
Make sure all the recap been checked carefully, to ensure the
safety and unharmed appearance of recycling products which sell to
customers.
10) Everything looks "like new"
Now, end product! Safe and durable, is equally matched with the new
tire. And ready to hit the road!
4. Optional production line
4pcs production line, 6pcs production line
8pcs production line, 10pcs production line
12pcs production line, 16pcs production line
20pcs production line, 24pcs production line, etc
