Hot Selling Two Roll Mill Electrical Heated Rubber Mixing Mill
Main components:
The series of rubber mix mill mainly consists of machine base,
machine frame, rolls, drive system, lubricating device, heating and
cooling device, roll gap adjusting device, safety brake device,
motor and retarder etc.
Application:
Open type two rolls rubber mixing mill is mainly used in following
cases for rubber products factory: natural rubber refining, raw
rubber and compound ingredient mixing, warming refining and
sheeting of glue stock.
Main Features:
1. Two rollers are made from Chilled Cast Iron, smooth surface is
highly polished and scratch proof by cutting knife: high hardness
and wear-resistant;
2. The roller is hollow structure, which is for adjusting the
temperature of the rollers by steam or cooling water in term of
different request;
3. Main bearings: bearing or copper bush or Nylon bush
4.The machine is equipped with an overload protection device to
prevent the major components from being damaged due to overloading.
5.The machine is also equipped with an emergency device. When an
emergent accident happens, just draw the safety pull-rod, and the
machine will stop immediately. It is safe and reliable.
6.The machine is equipped with scraper and wind-up unit, which can
take the reclaimed rubber away from the wind-up roller
Technical parameters:
| Version | XK-160 | XK-250 | XK-300 | XK-400 | XK-450 | XK-560 | XK-660 |
| Roll diameter(mm) | 160 | 250 | 300 | 400 | 450 | 560 | 660 |
| Working length of rolls(mm) | 320 | 620 | 750 | 1000 | 1200 | 1530 | 2130 |
| Front roll surface speed(m/min) | 8.99 | 15.3 | 15.1 | 18.65 | 24.32 | 27.72 | 28.6 |
| Friction ratio | 1:1.35 | 1:1.1 | 1:1.27 | 1:1.27 | 1:1.27 | 1:1.2 | 1:1.24 |
| Max.nip (mm) | 4 | 8 | 8 | 10 | 15 | 15 | 15 |
| Capacity per.batch (kg) | 1-2 | 10-15 | 15-20 | 18-35 | 25-50 | 35-50 | 165 |
| Motor power (kw) | 5.5 | 18.5 | 22 | 37 | 55 | 90 | 245 |
| Overall dimensions(mm) | 1160*920 *1370 | 3120*1322 *1500 | 3580*1550 *1695 | 4350*1850 *1780 | 5670*2390 *1670 | 5845*2284 *1978 | 7465*3662 *2080 |
| Weight(kg) | 1000 | 4000 | 5200 | 7600 | 12000 | 23000 | 49000
|
Features:
1.The rolls of machine adopts titanium alloy chilled cast iron,its
surface is smooth and hard,and the cavity is processed,water
cooling way makes the surface temperature of the rolls be balance;
2.This machine adopts hardened reducer;
3.This machine adopts bearing,lubrication by grease or thin oil;
4.The roll gap adjustment method can be manual or electrical;
5.The electrical system adopts LS Components imported from South
Korea;
6.This machine is set emergency stop button,easier operation than
the traditional brake method,safety and reliable.
