Hot sale rubber roll mixing mill /rubber two-roll mills/rubber open
mixing mill
Rubber mix mill mainly consists of machine base, machine frame,
rolls, drive system, lubricating device, heating and cooling
device, roll gap adjusting device, safety brake device, motor and
retarder etc.
It is mainly used in following cases for rubber products factory:
natural rubber refining, raw rubber and compound ingredient mixing,
warming refining and sheeting of glue stock.
parameters
Parameter
| Parameter/model | XK-160 | XK-250 | XK-300 | XK-360 | XK-400 |
| Roll diameter(mm) | 160 | 250 | 300 | 360 | 400 |
| Roll working length (mm) | 320 | 620 | 750 | 900 | 1000 |
| Capacity (kg/batch) | 4 | 15 | 20 | 30 | 40 |
| Front roll speed (m/min) | 10 | 16.96 | 15.73 | 16.22 | 18.78 |
| Roll speed ratio | 1:1.21 | 1:1.08 | 1:1.17 | 1:1.22 | 1:1.17 |
| Motor power (KW) | 7.5 | 18.5 | 22 | 37 | 45 |
| Size (mm) | Length | 1104 | 3230 | 4000 | 4140 | 4578 |
| Width | 678 | 1166 | 1600 | 1574 | 1755 |
| Height | 1258 | 1590 | 1800 | 1800 | 1805 |
| Weight (KG) | 1000 | 3150 | 5000 | 6892 | 8000 |
| Parameter/model | XK-450 | XK-560 | XK-610 | XK-660 | XK-710 |
| Roll diameter(mm) | 450 | 560/510 | 610 | 660 | 710 |
| Roll working length (mm) | 1200 | 1530 | 2000 | 2130 | 2200 |
| Capacity (kg/batch) | 55 | 90 | 120-150 | 165 | 150-200 |
| Front roll speed (m/min) | 21.1 | 25.8 | 28.4 | 29.8 | 31.9 |
| Roll speed ratio | 1:1.17 | 1:1.17 | 1:1.18 | 1:1.09 | 1:1.15 |
| Motor power (KW) | 55 | 90/110 | 160 | 250 | 285 |
| Size (mm) | Length | 5035 | 7100 | 7240 | 7300 | 8246 |
| Width | 1808 | 2438 | 3872 | 3900 | 3556 |
| Height | 1835 | 1600 | 1840 | 1840 | 2270 |
| Weight (KG) | 12000 | 20000 | 44000 | 47000 | 51000 |
Detailed picture
1. The roller is made of alloy chilled cast iron (including
separation cast or integrated alloy type). Their surfaces are hard
and wear resistance
2.Rollers are divided into the hollow roll and drilled roll. The
hollow roll(hollow roll inner cavity is bored , usually spraying in
bored cavity is adopted for heating and cooling ). The hollow roll
surface can be machined into smooth roll , whole smooth roll
,partial grooved roll, welded up alloy roll and so on . For high
cooling or heating speed , circumferential drilled roll can be
selected
3.The roll is supported on both end by double row spherical
bearings . Large machine adopts double bearing . so it has
advantages of running smoothly , energy saving , low noise and long
service life
4.All series mill are equipped with safety device according to the
new station stands , in order to protect the main parts from
damaged
5.The roll bearing lubrication : grease lubrication and oil
lubrication for order
6.The driving part adopts nylon pin coupling to prevent main parts
from being damaged due to overload of transmission part
7.The reducer adopts the hardened gear teeth surface reducer . It
has low noise , high transmission efficiency and long service life
8.The base is integral type, the transmission mode is closed
transmission , so it is safe and easy for use
9.The user can select the stock blender according to the process
