Second Hand Rubber Kneader/Old Internal Mixer/Old Rubber Mixer/Old
Rubber Machines 10L/20L/35L/55L/75L/110L
Main Application:
Rubber & TPR,EVA,Rubber sole, Rubber Roller, Hoses Belts, Sponges,
Vibration Insulator, Elastic Cord, Sealing Materials, Tire, Tapes,
Master Batches, Pigment Ink, Automobile Electric Rubber Parts,
Chemical Industry Compounds.
Features for rubber kneader :
1. With completely sealed condition, materials are mixed or
plasticated under certain pressure, controllable temperature, which
makes high production efficiency and obtains excellentstable
quality.
2. Spiral angle and over lapping length of the blades of the rotors
are of reasonable design and make the materials to bedispersed
uniformly.
3. Surface where is contacted with the materials are all platedwith
hard chromium and polished, which is corrosion-resistantand
wear-resistant.
4. Jacket construction is adopted in parts that surfaces
contactwith materials to achieve excellent water-cooling or
steamheating effect and fit in with the needs of plastics and
rubberprocessing technology.
5. Feeding from back door on the frame(or a separate top door)is
convenient for continuous process operation in aproduction line.
The mixing chamber is able to turn forward by 140 aroud the front
rotors to discharge and is easy for changingpigments and cleaning
the chamber.
6. Programmable logic controller(PLC) is adopted in
theelectric-control system, which has reliable control function
andalarm function, and interlock safety-protection function and
itis provided with serial interface of net.
product Parameters
| Model | X(S)N- 10X32 | X(S)N- 20X32 | X(S)N- 35X30 | X(S)N- 55X30 | X(S)N- 75X30 | X(S)N- 110x30 | X(S)N- 150x30 |
Total volume of mixing chamber | 25L | 45L | 75L | 125L | 180L | 250L | 325L |
Working volume of mixing chamber | 10L | 20L | 35L | 55L | 75L | 110L | 150L |
Driving motor power | 15KW | 30KW | 55KW | 75KW | 110KW | 185KW | 220KW |
Tilting motor power | 1.1KW | 1.5KW | 2.2KW | 2.2KW | 4KW | 4KW | 5.5KW |
| Tilting angle | 140° | 140° | 140° | 140° | 140° | 140° | 140° |
Rotational speed of the rotor (front/rear) | 32/23.5 r/min | 32/25 r/min | 30/24.5 r/min | 30/24.5 r/min | 30/24.5 r/min | 30/24.5 r/min | 30/24.5 r/min |
Pressure of compressed air | 0.5-0.8 MPa | 0.5-0.8MPa | 0.5-0.8MPa | 0.6-0.8MPa | 0.6-08MPa | 0.6-0.8MPa | 0.6-0.8MPa |
Capacity of compressed air | ≥0.5m³/min | ≥0.7m³/min | ≥0.9m³/min | ≥1.0m³/min | ≥1.0m³/min | ≥1.5m³/min | ≥2.0m³/min |
Pressure of cooling water | 0.2-0.4 MPa | 0.2-0.4MPa | 0.3-0.4MPa | 0.3-0.4MPa | 0.3-0.4MPa | 0.3-0.4MPa | 0.3-0.4MPa |
Pressure of heating steam (plastic mixing) | |
