XLB-550*550*4/50 Ton Rubber Paver Mould Machine/Rubber Press
Machine Floor/Playground Rubber Flooring Machine
50ton Rubber Tile Vulcanizing Press Machine 550*550*4
The machine applies to vulcanizing various kinds of rubber and
plastic model products as well as non-model products.
The machine is frame structure with below pressing form (upwards).
Under the hydraulic pressure, the piston plunger ascends to make
hot plate close for getting pressure, while the piston plunger
descends (namely hot plate turning on) by deadweight of hot plate,
platform and piston plunger to drive working fluid to fuel reserve
tank to achieve the aim of descending (namely turning on).
1. Technical Parameters
Model | XLB-550*550*1/50T | XLB-550*550*4/50T | XLB-1080*1080/120T |
mold closing force | 50T | 50T | 120T /160T |
plate size | 550*550 | 550*550 | 1080*1080 |
working layer | 1 | 4 | 1 |
daylight | 150 | 150 | 200 |
stroke | 150 | 600 | 200 |
control | automatic | automatic | automatic |
2. Features
Manual push-pull mold
High output and efficiency
Easy and safe operating
3. The Detailed Introduction
1) we usually design as clients' products and details request. our
machine is 4 working layers, 1 hour can made 8 pcs rubber floor. We
can also according your needs. and decide the working layers.
2) the machine is matched with manual push-out device .
3) we also can provide the different size of the molds, from 20mm
to 75mm thickness.
4) rubber mixer can also provided, if needed.
5) The press with 12 pcs molds and rubber mixer is only 8m³ of the
flooring area, it can be LCL for loading, So the sea freight is
very cheap.
6) We also can according to the customers' requirement, and design
the non-standard type of rubber tile vulcanizing machine.
4. Detailed Pictures
mixing tire granules pavement vulcanization final product
Rubber Mixer Machine.
This machine is mainly used to stir the granules with glue and
pigment to be different types rubber compound for the next
vulcanization
